Sage ENDEC Offers Firmware Update

Sage Alerting Systems has announced that the Sage Digital ENDEC model 3644 users should concern themselves with two upcoming events:

FEMA Signing Certificate updates (CR-Rev6)

A signing certificate used by FEMA to validate CAP alerts will expire on Aug 21, 2021 at 21:00:00 UTC. Sage has released a free firmware update for Rev95 that you must install to permit your ENDEC to continue to receive EAS CAP alerts from FEMA after that date. You can install the CR-Rev6 update at any time before August 21, 2021. You do not need to install it before the National Periodic Test as the NPT will not use CAP this year.
Please go to the Sage firmware update page at https://www.sagealertingsystems.com/support-firmware-new.htm to read the release notes and download the update file. You must already be running the Rev95 release to install this update.

National Periodic Test (NPT)

This year’s test will be sent via the Primary Entry Point (PEP) network, that is, via over-the-air audio-EAS only, on August 11, 2021 at 2:20p.m. EDT. CAP will not be used. To help ensure that you will receive and relay this test, take the following steps:

1) Check your log to make sure that you are receiving weekly tests from your monitor assignments, and that you have been originating weekly tests and relaying Monthly Tests as required by your license type.

2) Make sure your ENDEC has a filter to receive and relay the NPT. The easiest way to check this is to access your ENDEC with a web browser. From the main page, click the Tools button on the left column, then click the “Verify Req” button. If you see “Your ENDEC will meet the FCC requirements for the National Periodic Test” on the last line, your ENDEC is ready.

If you have any questions regarding this update or the NPT, please email us at support@… or call 914-872-4069 and press 1 for support. If you get voice mail, please leave a message and we will call you back.