Check Your EAS Set-up

On October 24, 2014, there was an unauthorized playing of the national emergency alert notification (EAN) tones during a syndicated radio broadcast.  These tones were a retransmission from the original EAN test conducted on Nov 9, 2011. There is a possibility that Digital Alerting Systems’ DASDEC units may have stored the recent unauthorized EAN and will retransmit on November 9 when the date/time stamp becomes valid.  Digital Alerting Systems has published a Field Service Bulletin on this matter, http://www.digitalalertsystems.com/pdf/DAS%20FSB-103014R1.0.pdf. If you are using a DASDEC system version 2.5 or earlier, AND if you are located in any area where this syndicated programming was broadcast on your EAS monitoring source/station, we suggest that you read the Field Service Bulletin for more information and for the company’s instructions on how to proceed. If you use another manufacturer’s  EAS equipment, we recommend you contact them if you have any questions.

(It’s very unlikely the recent national error event propagated to San Diego, and checking a client DASDEC unit, I found no stored national EAN’s. However, it’s a good time to check your configuration to turn on Strict Time if available on your device’s configuration. –ed)